Price Drop! Now 10% lower!

• Photo-Trans® SC heat transfer paper
• Available in two sizes (8.5"x11" OR 11" x 17").  Choose your size from the drop-down menu above.
• 25 sheets per package
• 1-step process offering good by-pass feeding in most color laser copiers.
• Provides excellent graphic reproduction and optimum brightness and color retention even on heavy weight fabrics such as sweatshirts and canvas.
• For use on light colour fabrics including heavy weight sweatshirts.
• For use in photocopiers/laser printers that use fuser oil only.

Instructions:

• Photo-Trans SC should be fed into your copier with the short dimension first (grain long).
• Trim away any unprinted paper around your image that you do not want to transfer.
• Apply with a commercial heat press to assure consistent pressure and heat.
• DO NOT use a hand held iron as the impression will not wash or transfer well. Be sure to choose garments that have a tight weave.
• This is particularly important when transferring to sweatshirts.375 degrees for 15 seconds, use Heavy Pressure. For best results: T-Shirts, Wait 5 seconds before peeling transfer. Sweatshirts: Wait 5-20 seconds before peeling transfer.Wash garments inside-out in warm or cold water on a gentle setting.
• Do NOT use bleach and do not iron directly over the image.After washing, colors may fade slightly.
• To restore the colors to their original brightness, place a sheet of regular white paper over the image and iron at a low cotton setting.
• It is essential to test the paper you plan to use before beginning production to determine suitability of the paper when used with your equipment, methods, and substrate material.

For use with:

• T-shirts
• Sweatshirts (including heavy weight)
• Mousepads
• Coasters
• Puzzles
• Binders
• Scrapbook Covers
• Padfolios
• Art Papers
• Handbags
• Magnets
• Wood Veneer
• Nylon